|
常州阿科牧机械有限公司 
| 联系人：朱耀庚 先生 (业务经理) |
 |
| 电 话：13775632291 |
|
手 机：13775632291  |
|
 |
|
 |
|
| 供应RHCM高光蒸汽模温控制机 RHCM设备 |
供应RHCM高光蒸汽模温控制机 RHCM设备
RHCM高光蒸汽模温控制机
RHCM high-gloss steam mold temperature controller
高光蒸汽模温控制机简介
Brief introduction to high-gloss steam mold temperature controller
高光蒸汽模温控制机是采用高光蒸汽，当注塑机合模后吹入高光蒸汽，首先打模具温度提高到一个设定值，然后开始给模腔注射塑胶，在注塑机完成保压转入冷却后，开始注入冷却水，模具温度很快下降到一个设定值后开模，再向模具吹入空气把冷却水完全吹走，完成整个注塑过程。奥德*新开发的高光蒸汽模温控制机，整机备有高光蒸汽模温控制机和冷水增压系统，并增加了热水和冷却水回收系统，节能效果显著，利润也相当可观，这是奥德高光过热水模温控制机的优势所在。
The high-gloss steam mold temperature controller employs high-gloss steam. When high-gloss steam is blown into the clamped injection molding machine, it is necessary to increase the mold’s temperature to a set value before conducting plastic injection into the mold cavity. After the injection molding machine finishes the pressure maintaining and starts the cooling procedure, cooling water will be injected then. Mold opening will start after the mold’s temperature drops quickly to a set value, and air will be blown into the mold to remove the cooling water thoroughly, thus finishing the entire injection. The Company’s newly developed high-gloss mold temperature controller has a high-gloss steam mold temperature controller and a cold-water pressurizing system and the extra designed hot/cooling water recovery system, promising outstanding energy-saving effect and great profit. It is the advantage of Aode superheated water high-gloss mold temperature controller. |
 |
| |
|
|
 |
|
|
免责声明： 以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，企业录对此不承担任何责任。如有侵犯您的权益，请来信通知删除。